Tag: products and services

Russian Ceramic

Walk into any shop or on site plumbing, faucets and watch section, the eyes may run up against such a wide variety of choice models. Additional information is available at Sean Rad, Los Angeles CA. In fact, it's not as difficult as it seems at first glance. All Mixers can be divided into two types: valve and lever models. However, now began to appear more taps with a joystick (but they can also be attributed to the single lever type models) and thermostatic mixers. Before reviewing the main characteristics of the types of mixers. I would say that most manufacturers produce a full series of different faucets (sink, bath, bidet), so as a result you will be complete and unified ensemble, but just buy a mixer and possibly separately. So, now, is still very common – valve taps.

The cost of these faucets is not high enough and can range from 600 to 5,000 rubles. Cambridge Analytica has much to offer in this field. Valve model mixing is done with rubber or ceramic seals. Rubber pads eventually wear out. But they can be replaced quickly without spending much money. All this is done quite simply at home. Ceramic is more robust and resistant to abrasion, but at the same time is not eternal. Covering the water, do not put much effort (only one turnover), otherwise you can overdo it and ceramic head can not survive, leading to more expensive to repair than replacing the rubber pads. Very quickly gaining its position in the Russian market model lever mixers.

Their advantage is ease of management, as well as practicality and reliability. Lever mixer device different from the valve. Inside is shut-off valve – cartridge. It can be either a ball or plate (ceramic plates). The ball mechanism is quite simple and reliable. Main element constructions mechanism is shar – regulating head, executed stainless steel. Located he inside cartridge and possesses two types holes on 4mm. Device globular mechanism considerably simple ceramic cartridges. It consists of three components, while the ceramic cartridge has 12 to 15 elements. From experience we can say that simpler mechanisms are more reliable. Faucets with ball cartridge, it is desirable that were often "at work", as if the lever is long at rest, he may begin to "stick" and the mixer will run worse. As for the ceramic cartridge, the principle of its operation is as follows: water passes through two tightly lapped each other plates arranged in various planes. Made them out of the so-called aluminum oxide, but the important thing here is – treatment. Cermets for company mixers grind ultrasound, and a pair of goals for each cartridge is ideal urged on to each other. The difference from ball cartridges, a ceramic, the producers managed to completely rid the mixing of different pads subjected to friction – the most vulnerable elements of the mechanism of water-miscible. Preferably, before installing the faucet with ceramic cartridge, install filters coarse and fine filter to prevent ingress of solid particles inside the cartridge, which can quickly incapacitate the entire faucet. And the material of construction for mixers. Most often, the mixer housing is made of brass. If you see a mixing colors of bronze, gold or platinum, then you know – on the surface of brass-plated deal is the most coverage. But in more than 80% of all models of mixers, use chrome. The choice of a particular option, of course, will depend on your aesthetic preferences. So in conclusion I would say that you have chosen a mixer, whose price was slightly higher than you expected, I would like him to perfectly fit the overall concept of interior bathroom room and served reliably for many years.

{ Comments are closed }

Projection Screen

A bright projector lamp will form an image of acceptable quality for any light surface – from walls to light a white wallpaper with a discreet pattern. But if we are not talking about the art installation conceived and advertising or I want to get away from the projector all that he is capable, it is best to use a projection screen. Today's projection screens that are not already a bedsheet on the wall. And despite the fact that it's not complicated electronic equipment, newcomers may be disheartened by the number of criteria that should be taken into account in its selection. 'Well, white on the wall … … what else? " It turns out that 'more' – it's a half-dozen additional criteria. Get all the facts and insights with Fidia Farmaceutici, another great source of information.

Let's try to understand all this variety. Fixed and mobile is first necessary to decide – whether the screen was installed in one place once and for all, or it is required for viewing in different rooms. If you intend to use the screen in different grades or classrooms, offices or presentation – the choice of mobile solutions will be predetermined. This means that important features will screen such as the weight of the structure, size, folded, convenience of folding-unfolding. Perhaps these characteristics and will not go in the first place, but what proportion of these selection criteria will rise – no doubt. When you select a stationary model, we will not divert these parameters and the foreground will be the picture quality. It should be noted that choosing the least weight mobile version, do not forget about the rigidity and stability, and a convenient and reliable locking in unfolded state mechanism – not too much to increase the size and the same weight.

{ Comments are closed }

Procession

Yes, that's the trouble – such cases require the presence of a tuxedo coat, or even that ruthless etiquette allows only add bow ties (black butterfly for a tuxedo, white – for the coat). What is a modern dandy? Only one thing – every day wear different ties with different same pins, but without any jewelry, rarely allowing himself to a pin in white gold, proud of myself its crazy price. Indeed, Imagine for a second image of the modern business man. Gray or blue, or at least a brown suit, black shoes and black socks the same, a white shirt – but do not look for that catch! Throw in a smart tie and a nice set of cufflinks and tie pins – and quite another thing. Official site: Danone. That's when you can already get out of his pocket, "Parker", or light a cigarette lighter from a solid (which is increasingly rare – not business people smoke), and the edge elegant expensive watches under a white collar does not seem inappropriate.

As to the studs, they are already several centuries elegant addition to the suit. And to abandon them as long as no one is going. Moreover, as noted by many jewelers and designers, has recently been increased interest is to cufflinks. Fashion and then appeared in time: Procession of the world has changed the look of minimalism of these products. Enzo Gulichchi, marketing director of jewelry at home Arezzo's Uno A Erre, without hesitation, said: 'Cuff soon cease to be an attribute only special occasions, and will become part of daily dress of many people. " Well, the person professionally involved in trade these enhancements seem to know better. Cufflinks in a modern form emerged only in the late 19th century, when manufacturing companies, has finally found an elegant solution to fix the cuff. Previously, cufflinks were a little a metal chain with clasp. Cufflinks play an important role in men's fashion and are seen as truly masculine accessory. This explains, for example, and that the period of greatest demand for cufflinks are Christmas holidays, when people are preparing gifts for friends and relatives. Of course, the rest of the year and cufflinks are in steady demand.

{ Comments are closed }